La présentation est en train de télécharger. S'il vous plaît, attendez

La présentation est en train de télécharger. S'il vous plaît, attendez

Holocauste Transparent light effect (Basic)

Présentations similaires


Présentation au sujet: "Holocauste Transparent light effect (Basic)"— Transcription de la présentation:

1 Holocauste Transparent light effect (Basic)
To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

2 Holocauste élimination des Juifs et autres ethnies par les Nazis pendant la Seconde Guerre mondiale. (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

3 Holocauste destruction totale, plus particulièrement par le feu
(Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

4 Génocide extermination systématique d’un groupe ethnique, culturel ou religieux (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

5 Pendant la Seconde Guerre mondiale, les gens étaient au courant de l’antisémitisme des nazis et de l’existence des camps de concentration. (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

6 Quand les nazis ont pris le pouvoir avec Adolf Hitler, ils ont commencé à passer des lois discriminatoires et à provoquer des émeutes (riots) anti-juives. (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

7 Les nazis ont aussi persécuté les Roms, les Slaves, les homosexuels et les handicapés physiques ou mentaux. (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

8 En janvier 1942, l’adjoint d’Hitler a annoncé un plan pour tuer tous les Juis d’Europe et aussi ceux que les dirigeants allemands voulaient éliminer. Le nombre de personnes tuées par les nazis allait causer un grand choc dans le monde entier. (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

9 Les camps de la mort sont trouvés de Buchenwald et de Bergen-Belsen – deux camps d’extermination où des millions de Juifs européens et d’autres personnes ont étés tués sur les ordres d’Hitler. (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

10 Des trains qui arrivaient de toute l’Europe occupée transportaient des gens, surtout des Juifs, vers ces camps où on les affamait, les tuait au travail, les fusillait ou les gazait. (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

11 Ce massacre d’environ six million de Juifs pendant la Seconde Guerre mondiale est connu sous le nom d’holocauste. (Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

12 Transparent light effect
(Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

13 Transparent light effect
(Basic) Transparent light effect To reproduce one of the shapes on this slide, do the following: On the Home tab, in the Slides group, click Layout and then click Blank. On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Also in the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Line Color in the left pane, and then select No line in the Line Color pane. Press and hold SHIFT to constrain the shape to a circle, and then drag to draw a circle on the slide. In the Type list, select Radial. Also under Gradient stops, customize the gradient stops that you added as follows: Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in slider. Click the button next to Direction, and then click From Center (third option from the left). Select the first stop in the slider, and then do the following: Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 60% (third row, fourth option from the left). In the Position box, enter 0%. Select the second stop in the slider, and then do the following: In the Transparency box, enter 80%. Click the button next to Color, and then under Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). In the Position box, enter 50%. Select the third stop in the slider, and then do the following: In the Transparency box, enter 70%. In the Position box, enter 100%. On the Home tab, in the Drawing group, click Shape Effects, point to Soft Edges, and then click 10 Point. In the Transparency box, enter 100%. Click the button next to Color, and then under Theme Colors click Dark Blue, Text 2, Lighter 40% (fourth row, fourth option from the left). To reproduce the other shapes on this slide, do the following: Select the circle on the slide. On the Home tab, in the Clipboard group, click the arrow under Copy, and then click Duplicate. Repeat this process to create a total of 10 circles. For each circle, press and hold SHIFT and then drag the adjustment handles to resize as needed. On the slide, drag the circles to position them at random intervals. To reproduce the different color and transparency effects in each of the shapes, do the following: In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane. Under the Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear in the slider, and then do the following: Select the shape. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. For the first and third (small circle below larger circle) circles from the left: In the Transparency box, enter 90%. In the Transparency box, enter 85%. For the fourth circle from the left (large circle above third circle): For the second circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the fifth circle from the left: In the Transparency box, enter 88%. In the Transparency box, enter 71%. For the sixth circle from the left: In the Transparency box, enter 84%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 227, Green: 209, Blue: 143. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 223, Green: 205, Blue: 75. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 214, Green: 195, Blue: 84. For the seventh circle from the left: In the Transparency box, enter 60%. For the ninth circle from the left (small brown circle below larger blue circle): For the eighth circle from the left, do not change the Gradient stops settings in the Format Shape dialog box. For the tenth circle from the left (large blue circle above ninth circle): In the Transparency box, enter 74%. To reproduce the background on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 65, Green: 68, Blue: 97. Click the button next to Color, and then click Black, Text 1 (first row, second option from the left). In the Position box, enter 99%.

14

15 Camp d’holocauste Holocaust uncovered


Télécharger ppt "Holocauste Transparent light effect (Basic)"

Présentations similaires


Annonces Google